|
|
Building AdmixturesThere are 14 products in this category. You are viewing page 1 of 3.  
 |
201 MORTAR ADMIX
Mortar Admix is an air entraining plasticiser that replaces lime in the mix to provide an easy to work “butter like” consistency to the mortar and to prevent shrinkage, cracking and crazing during the setting process. For use in brick laying and plastering mortars. Provides a degree of frost resistance and long term resistance to freeze-thaw cycles when set. To BS 4887.
|
| COLOUR |
|
| PACK SIZE |
BOX QUANTITY |
5L
25L
200L |
1
4 |
|
 |
202 INTEGRAL LIQUID WATERPROOFER
Integral Liquid Waterproofer is a liquid additive that provides long term water protection to mortar, concrete and rendering. Reduces water permeability and is suitable for all applications where resistance to water absorption is necessary such as pool and tank linings, roof areas, external rendering and pointing and structures below ground level. To BS 4887 (initial air).
|
| COLOUR |
|
| PACK SIZE |
BOX QUANTITY |
5L
25L
200L |
1
4 |
|
 |
203 ACCELERATOR & FROSTPROOFER
Accelerator & Frostproofer is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering to provide frost protection during the setting period. Effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture.
|
| COLOUR |
|
| PACK SIZE |
BOX QUANTITY |
5L
25L |
1
4 |
|
 |
204 EVERMIX 3 IN 1
Evermix 3 in 1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application. Evermix 3 in 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting.To BS 4887 (initial air).
|
| COLOUR |
|
| PACK SIZE |
BOX QUANTITY |
5L
25L |
1
4 |
|
 |
206 STRIKE RELEASE OIL
Strike Release Oil is a highly effective release agent to enable concrete shuttering to be removed easily, leaving the edge of the concrete structure clean and well formed. Suitable for most types of form work including potable water structures, not affected by rain after application.
|
| COLOUR |
|
| PACK SIZE |
BOX QUANTITY |
| 5L |
4 |
|
There are 14 products in this category. You are viewing page 1 of 3.
|
* All products marked with an asterisk are subject to mimimum purchase requirements.
